12mm 12v GS8208 double data line rgb pixel Christmas holidays led string light

Part No:IL-P12V12GS8208

Features: 

1.12mm diameter 39mm deep

2.dc12v 0.2W/pcs(LED on full white)

3.50pcs/chain or customer request

4.GS8208 IC chip

5.Double DATA line,SPI signal break-point continuous transmission.

6.Each pcs with F8 diffused rgb pixel, also can do clear F8 led lamp.

7.4Pin color cable with 20AWG

What's more 

12mm rgb pixels are addressable controllable led lights, which you can program any color,or animations.Each rgb pixel is with silicone tube then glue inside, so those pixel dots are waterproof.They are typically used to make outdoor signs, but with the development of time, people also like to use those dot pixel to make Christmas tree,bridge decoration,curve...

Those dot pixels are soldered by a 4Pin cable-12v+,DAT 1,DAT 2,GND.Those pixels are with GS8208 double data signal,data is transfer to first led and second led also,so if second led bad,the rest led light still woking good, just if 2 leds bad at the same time then will affact the rest of pixel chain light. The pixels use 8mm(F8) diffused rgb leds,with a 120 degree beam angle.The total max brightness of all leds is about 1600mcd.

Those Christmas pixel leds solder by the strand, each strand have 50 pixels in series. Each strand has female and male JST SM 4pin connectors so that you can connect them with multiple strands in a sow,as many as you like,just give enough power for them. And each strand we also  have extra power cable for you to each charging power. Normal each strands you need to connect power once.

Of course, you can also cut pixels per strand you wish,just notice to solder them with right wies. 

You can drive these dot pixels with an Arduino,RF remote controller,or sd card controller such as K-1000c,K-8000C....You also can control them with madrix, just need dmx decoders or dmx controller with decoder function.